5 Reasons Why Blendjet Not Working – (Easy Fix)

Hey there! Welcome back to another troubleshooting guide. Today, I want to address a common issue that many of you might have encountered – your BlendJet not working as expected. Worry not if you’ve been scratching your head, wondering what’s causing the hiccup in your blending experience!

Why Blendjet Not Working


  • Always charge your BlendJet for at least an hour to ensure it operates smoothly.
  • Check that the arrows on the base and jar are aligned before blending.
  • If blending stops, turn it upside down, shake it, or use a fork to clear any objects under the blade.
  • Avoid overfilling the jar to prevent spills and optimize blending performance.
  • If issues persist, don’t hesitate to contact BlendJet support for a replacement or refund.

Why Blendjet Not Working? – 5 Reasons

BlendJet may not be working due to insufficient charging, misaligned arrows, objects stuck under the blade, an overfilled jar, or, in rare cases, a potential malfunction, so contacting BlendJet support for a replacement or refund is recommended.

Here, I’ll share 5 reasons why your Blendjet is not working and some quick solutions to get it back on track.

1. Insufficient Charging

One of the most common reasons your BlendJet 2 might not be functioning as expected is insufficient charging. Despite the excitement of receiving a new device, users sometimes overlook the crucial step of fully charging their BlendJet before use.

To ensure optimal performance, it’s recommended to charge the blender for at least an hour to an hour and a half. A fully charged BlendJet can handle approximately 15 blends, providing the power needed for smooth and effective operation.

If you encounter issues, always check the battery status first before delving into other troubleshooting steps.

2. Misaligned Arrows

A frequently overlooked factor that can impact BlendJet’s functionality is misaligned arrows. The blender will only operate correctly if the jar’s and base’s arrows are properly aligned.

This straightforward step ensures that the components fit together precisely, preventing any hindrances to the blending process.

3. Object Stuck Under the Blade

Another reason your BlendJet might be signaling issues during operation is the presence of an object stuck under the blade. When the blender detects an obstruction, it prompts a red light. In such cases, a quick shake might not suffice.

The recommended approach is to turn the BlendJet upside down, shake it gently, and attempt to resume blending. If the issue persists, using a fork or a similar tool to dislodge the obstructing object carefully can often resolve the problem.

4. Overfilling the Jar

Overfilling the BlendJet jar is a common mistake that users make, leading to spillage and impeding the blending process. To avoid this, pouring the liquid base, typically 6-8 ounces, is advised before adding any fruits or other ingredients.

By following this order, users can prevent overfilling and ensure that the BlendJet operates efficiently without the risk of messy spillage. Learning from past experiences, it’s crucial to be mindful of the jar’s capacity to achieve optimal results.

5. Malfunction or Defect

After exhausting all the troubleshooting steps above, if your BlendJet 2 still refuses to work, it might be indicative of a malfunction or defect. Instead of dwelling on the issue, it’s recommended to reach out to BlendJet’s customer support at support.blendjet.com.

Fortunately, BlendJet offers a money-back guarantee, allowing users to either receive a replacement device or a full refund. Users can promptly seek assistance by acknowledging the possibility of a manufacturing glitch, ensuring a swift resolution to their BlendJet concerns.


Why is my BlendJet charged but not working?

Ensure the arrows on the base and jar are aligned correctly. If they are not aligned, the BlendJet won’t function. Align the arrows, and you should be good to go.

My BlendJet stops blending midway and flashes red. What should I do?

This could be due to an object stuck under the blade. Turn the BlendJet upside down, shake it, and try blending again. If the issue persists, carefully use a fork or similar tool to remove the obstruction.

Can I blend with the top off my BlendJet?

No, the BlendJet will not blend with the top-off. Make sure to align the arrows and securely place the jar on the base for the blender to operate.

What’s the maximum capacity for the BlendJet 2 jar?

To avoid overfilling, putting 6 to 8 ounces of liquid as a base is recommended before adding other ingredients. Overfilling can lead to spills and hinder the blending process.

My BlendJet 2 is fully charged, the arrows aligned, and there are no obstructions, but it still won’t work. What should I do?

If you’ve tried all troubleshooting steps and the BlendJet is still not working, it may be a rare malfunction. Contact BlendJet support for assistance, and they can either replace your BlendJet or provide a refund.

How long should I charge my BlendJet for optimal performance?

Charge your BlendJet for at least an hour or an hour and a half upon receiving it. This ensures a full charge, giving you around 15 blends before recharging.

Can I use BlendJet 2 for hot liquids or soups?

No, BlendJet is designed for cold and room-temperature liquids only. Using it for hot liquids can damage the blender and its components.

Is the BlendJet 2 dishwasher safe?

While the BlendJet jar is dishwasher safe, washing the base and lid by hand is recommended to prolong the blender’s lifespan.

What is the warranty on the BlendJet 2?

BlendJet typically offers a money-back guarantee. If you encounter issues, contact their customer support, and they can provide a replacement or a refund.

Can I blend ice cubes with the BlendJet 2?

Yes, the BlendJet 2 is capable of blending ice cubes. However, it’s advisable to use smaller ice cubes to ensure smoother blending and to avoid overtaxing the motor.


Understanding these potential issues and their solutions is essential for maintaining a positive experience with BlendJet. Whether it’s ensuring proper charging, aligning arrows, clearing obstructions, avoiding overfilling, or seeking customer support, addressing these factors can contribute to a trouble-free blending experience.